CFMOTO CForce 800/1000 ATV 60″ Poly Snow Plow Kit – KFI

CFMOTO CForce 800/1000 ATV 60″ Poly Snow Plow Kit – KFI

The CFMOTO CForce 800 XC/1000 ATV Poly Snow Plow Kit 60″ from KFI is a top-notch solution for tackling snow-covered terrain. This kit is specifically designed for CFMOTO CForce 800 XC (2019-2024) and CFMOTO CForce 1000 (2021-2024) models

KFI Poly Snow Plow Kit for ATVs – Compatible with CFMOTO CFORCE 800 XC and 1000 Overland (Not Compatible with Gen. 3 Models)

– 2019-2024: CForce 800 XC (Not compatible with Gen. 3 CForce 800 Touring)
– 2021-2024: CForce 1000 Overland (Not compatible with Gen. 3 CForce 1000 Touring)

This KFI plow kit is specifically designed for the mentioned models and does not fit Generation 3 versions.

Key Features

– 60-inch poly snow plow blade for efficient snow removal
– Durable steel construction for withstanding harsh winter conditions
– Easy installation with a straightforward mounting system

CFMOTO CFORCE 800 XC/1000 ATV Snow Plow Mount – KFI (106055)

– 100% Made in the USA
– Mid-mount system
– Plate constructed from 3/16” grade 50 steel
– Pin tabs made from 1/4” thick grade 50 steel
– Tapered plow tabs to reduce hang-ups while trail riding
– Powder-coated black for superior durability
– Complete installation instructions included
– All necessary mounting hardware included
– Pin tab width for plow mounting: 14 1/2″ center-to-center

KFI Poly Straight Blade (60″)

– **100% Made in the USA**
– Features a 7″ high, 2-ply top rubber flap
– Includes plow markers
– Dual curvature face design for enhanced snow-moving efficiency
– Vertical blade face height measures 21”, with an approximate total height of 27” when including the snow flap
– Fully adjustable blade skids with bolt-on brackets
– Heavy-duty 3″ diameter grade-50 steel skid plates
– Made from flexible heavy-duty black poly material
– Reinforced with 3/16” grade-50 ribbing for a secure connection to the swivel tube
– Powder-coated for exceptional durability
– Equipped with a two-sided, 3/16” x 3.00” grade-50 steel wear bar
– Wear bar is secured with heavy-duty grade 8 bolts
– Designed to fit all KFI mount kits
– Complete installation instructions are included
– All necessary mounting hardware is provided

KFI Snow Plow Push Tube ATV (105000)

– 100% Made in the USA
– Mid-mount system
– Plate constructed from 3/16″ grade 50 steel
– All pin tabs are made from 1/4″ thick grade 50 steel
– All plow tabs are tapered to reduce hang-ups while trail riding
– Powder-coated black for enhanced durability
– Complete installation instructions included
– All mounting hardware included

**Important Safety Note:**

Failing to follow the safety rules below may significantly increase the risk of damaging your plow system, machine, or winch (if applicable). KFI will not be held liable for any bending of materials that is not caused by defects or imperfections but rather by not following these safety guidelines:

1. Do not exceed 5 MPH, even with the blade raised.
2. Ensure that all nuts and bolts are tightened according to the installation instructions.
3. Never operate this KFI product with missing or damaged parts.
4. Drive slowly over bumpy and rough terrain; driving fast may damage the winch (if applicable) or plow.
5. Never raise the plow above the point of contact, as it may damage the machine or winch (if applicable).
6. Perform regular inspections and maintenance on the plow system and hardware before use.
7. Operate with extreme caution on slopes, steep grades, and rough terrain.
8. Be aware of any hidden objects under the snow.
9. Do not ram the blade into the snow pile.